Close
Products
  • Products
  • Content

    Products By

    The product images shown are Illustrative only and may not be an exact representation of the product.

    HeatGuard™ Protective Sheathing Hi-Temp

    Used to help protect critical hose assemblies from spark, molten splash, heat and fire requiring SAE AS1072E specification. HeatGuard High-Temp is a completely non asbestos, heat-resistant, protective sleeving that is a white knitted fiberglass yarn woven and coated with iron oxide red silicone rubber. It goes on easily over most hose and couplings, with only hose clamps or wire ties required for fastening. For use in welding areas, engine compartments, steel mills, oil rigs, and hot asphalt construction. Any application where hose is exposed to high temperatures. Additional sizes available in standard HeatGuard. Temperature Range: -54°C to +260°C (-65°F to +500°F) for continuous exposure and up to +1093°C (+2000°F) for 15 to 20 minutes and up to +1650°C (+3000°F) for 15 to 30 seconds.

    • HeatGuard can pay for itself in reduced replacement and maintenance costs.
    • Available in two grades – HeatGuard and HeatGuard Hi–Temp.
    • Nominal wall thickness - 0.142".
    • Packaged in 50-foot lengths.
    • Contact Hose Product Application for details.

    All Parts

    Part # Product # Description Maximum Working Pressure (psi) Maximum Working Pressure (bar) Inside Diameter (in) Inside Diameter (mm) Outside Diameter (in) Outside Diameter (mm)

    Sort & Filter

    Close
    Close